Hold the ‘multi-function’ key on both earbuds for a period of two seconds.

Both earbuds will now switch on and connect automatically with each other.

After a short 'beep' the earbuds will now search for a Bluetooth device.

Turn on the Bluetooth on your device.

Once the earbuds are paired this will be indicated by flashing red and blue lights on one of the earbuds.

Open the Bluetooth option on your mobile device.

Select the option ‘Series 3’.

Once the connection has been achieved your Bluetooth status will display as ‘Connected’ and a chime will be transmitted by the earbuds.

Hold the ‘multi-function’ key on one of the earbuds for a period of two seconds

This earbud will now switch on

Turn on the Bluetooth on your device

Select the option ‘Series 3’

Once the connection has been achieved your Bluetooth status will display as ‘Connected’ and a chime will be transmitted by the earbuds

Ensure that the Bluetooth is activated on the device that you have previously connected the earbuds to.

The device must be within 10 meters of the earbuds.

Press and hold the multi-function button on both earbuds for 2 seconds.

Both earbuds will automatically connect with each other (you'll hear a chime).

The earbuds will now search for a Bluetooth device which they have previously been connected to.

The earbuds will now automatically connect to your Bluetooth device.

When a call is incoming, please press the multi-function key to answer the call

Press the multi-function key to end the call

When a call is incoming, please press and hold the multi-function key to reject the call

Once the call is rejected, press the multi-function key to return to music listening mode

Press the multi-function key to play/pause your music

Press and hold the “ - “ for one second to skip back to the previous track

Press and hold the “ + “ for one second to skip forward to the next track

Quickly press and release the “ + “ to increase the volume

Quickly press and release the “ - “ to decrease the volume

Power off the 2 earbuds and hold them next to each other.

Press and hold down the multifunction button on both earbuds for 10 seconds until the lights on both earbuds flash blue and red intermittently.

Release your fingers from the multifunction button.

Triple press the Multifunction Button on both earbuds repeatedly. One of the earbuds will then flash red and blue and the other earbud will have no flashing lights. The two earbuds are then paired
successfully.

Place both earbuds in the charging case

Or

Press and hold the multi-function button for 2 seconds.

Put the earbuds in the charging case.

A red light on the Series 3 indicates that they are charging.

Sometimes one of the earbuds will take slightly longer to charge then the other.

When the red lights turn off it means that charging has completed.

When you place the earbuds in the charging case and the lights on the front don't turn on, it means that the charging case battery is empty.

It takes approximately 120 minutes to fully charge the charging case and earbuds.

Please Note: If you are having any trouble charging the earbuds it is likely because the charging points on either the earbuds or charging case require cleaning. You can do this by scrubbing them with a dry Q-tip or scraping anything away with a wooden toothpick if necessary

Charge the charging case by connecting the Type-C cable provided into the slot on the rear of the case.

The lights on the front of the charging case indicate the percentage of charge remaining in the case.